Talc Powder (MSDS)

MATERIAL SAFETY DATA SHEET

SECTION 1---PRODUCT IDENTIFICATION

Trade Name (s):TALC POWDER

Chemical Name: Hydrated Magnesium Silicate

Predominantly SiO2

Manufacture:Head Office:DOYO(HONG KONG)LIMITED

Address:26-5-1 Xilu Street Xigang District Dalian,China.

Factory:CHINA HAICHENG DOYO TALC POWDER FACTORY

Add:Sanli Bridge Street Haicheng City,Liaoning,China.

SECTION2-----PRODUCT COMPOSITION

Component Per Cent Pemmissible Exposure Limit(PEL)

TALC 96% 4.0 mg/cu. Meter twa

CARBONATES 4% resporable mass

SECTION 3---PHYSICAL DATA

Appearance and Odor : White Powder; Odorless

Boiling Point : Not Applicable

Vapor Pressure : Not Applicable

Specific Gravity : (Water=1): 2.55

SECTION 4.---FIRE AND EXPLOSION

Flash Point : Nonflammable

Flammable Limits : Not Applicable

Extinguishing Media : Not Applicable

Unusual Fire or Explosion Hazards : None

Liquid Classification : Not Applicable

Auto-Ignition Temperature : Not Applicable

Special Fire Fighting Procedures : None

SECTION 5---HAZARDS IDENTIFICATION

Health Hazards Acute & Chronic:

Acute: Inhalation of dust may cause irritation of upper respiratory system.

Chronic : long term inhalation of high amounts nuisance dust may overload lung clearance mechanism.

Signs & Symptoms of Overexposure:

Inhalation :Coughing，Irritation of the nose and throat.

Congestion may occur upon overexposure

Skin Contact :Not Applicable

Ingestion :Not Hazardous.

Skin Absorption :Not Applicable

Eyes :Temporary irritation and/or inflammation

Medical Conditions Which Maybe Aggravated:
Pre-existing upper respiratory problem

(such as bronchitis, emphysema, asthma and others).

Target Organ (s) : Lungs

Primary Entry Routes : Inhalation.

SECTION 6---FIRST AID/EMERGENCY PROCEDURES

Inhalation :Remove from dusty area; drink water to clear throat, blow nose to evacuate dust

Skin Contact : Not Applicable

Skin Absorption : Not Applicable

Ingestion : Not Applicable

Eyes : Do not rub eyes. Flush with copious amounts of water to remove any dust parties. Consult physician if irritation persists

SECTION 7---REACTIVITY DATA

Stability : Material is stable. Hazardous polymerization will not occur

Materials to Avoid : Not Applicable

Stability Condition to Avoid : Not Applicable

Hazardous Decomposition Products: Not Applicable

Hazardous Polymerization Indicator: No

Conditions to Avoid Polymerization: Not Relevant

SECTION 8--- SPILL OR LEAK PROCEDURES

Spill Release Procedures : Wear protective equipment. Clean up in manner that

doesn’t disperse dust into the air.

Waste Management : Not considered as hazardous waste. Place waste and

spillage in closed containers.

Dispose of in approved landfill.

SECTION 9--- SPECIAL PROTECTION INFORMATION

Goggles : The use of safety eyewear, to protect from dust, is recommended.

Gloves : Normally not required. Recommended to use gloves to protect overly sensitive skin

Respirator : Use approved respirators/dust masks.

Ventilation :Use adequate exhaust ventilation and/or dust collection to keep dust levels below PEL.

SECTION 10---SPECIAL PRECAUTIONS

Storage Segregation Hazard Classed : Not Applicable

Special Handling/Storage : Store in a dry place. Repair all broken bags immediately. Avoid creating dust. Maintain good housekeeping practice.

Special Workplace Environment Controls : Adequate ventilation and appropriate local Exhaust where needed to keep dust levels below PEL

.Others :Comply with local regulations.

SHRINE ENTERPRISE INC.

ADDRESS: ROOM 2520, MINGSHI FORTUNE BUILDING, NO.20 GANGWAN STREET,ZHONGSHAN DISTRICT, DALIAN, CHINA.

EMAIL: talcum@tom.com